top of page

This Stereo Breakout Cable will connect Dual XLR 3 Pin connectors to a 4.4 mm Pentaconn TRRRS stereo output.  This cable is primarily used as an adapter for balanced headphones terminated in Dual 3 pin XLR male connectors and convert it to 4.4 mm Pentaconn TRRRS for DAPs and DACs with 4.4 mm Balanced Outputs.  It can also send dual XLR outputs from mixers, DACs & amplifiers to equipment with 4.4 mm Pentaconn inputs.  This cable transmits a balanced stereo signal.


The Pinout is as follows, also pictured above:


4.4 mm Tip, L+ : XLR Left Pin 2

4.4 mm Ring 1, L- : XLR Left Pin 3

4.4 mm Ring 2, R+ : XLR Right Pin 2

4.4 mm Ring 3, R- : XLR Right Pin 3

4.4 mm Sleeve, Ground : XLR Left & Right Pin 1


The Right XLR channel is marked in Red, and the Left is marked in Black.


All cable options include excellent dielectric insulation and are fully shielded to reject EMI and RFI.


This cable is available in SPOFC.


SPOFC Cable Specs

  • 24 AWG Silver Plated Oxygen Free Copper Conductors (6x)
  • High density braided copper shield.
  • PTFE Teflon dielectric insulation
  • FEP Outer Jacket
  • Outer Cable Diameter:  5.8 mm


XLR 3 Pin Female Connector Specs

  • Rhodium Plated Pure Copper Pins
  • Carbon fiber and nonmagnetic stainless steel housing


4.4 mm Pentaconn TRRS Plug Connector Specs

  • Gold Plated Pure Copper Contacts
  • Carbon fiber and nonmagnetic stainless steel housing

Dual XLR 3 Pin Female to 4.4 mm Pentaconn Balanced Stereo Breakout Adapt

    bottom of page